SUMEC TOUCH WORLD

The MAP2, MAS2 and MAC2 are single axis joysticks designed to control 2 proportional solenoids. MAS2 version has signal outputs, while MAP2 has power outputs (PWM). MAC2 instead, has CAN bus outputs.
All versions of joystick are supplied with a spring return simple knob or, optionally, with mechanical clutch.

Furthermore, the 3 types of joystick are available with finger joystick, also in this case, with or without clutch. The versions with finger joystick are called respectively MAP2L, MAS2L and MAC2L.

Like our 2 and 3-axis versions, all our one axis joysticks can be programmed directly by the installer using our AIS interface.

If the joystick has to be fitted on machines working in high-salinity ennvironments, we also have versions for marine use. These models, called MAP3, are subjected to special treatments that allow them to better resist against salt.

MAP2/MAP2L main characteristics:

- one proportional section (A+B) direct control (2 PWM outputs max 2.5A);

- adjustable minimum/maximum current for each directions (A+B);

- adjustable rise/fall time ramp up to 25 seconds (step 0.1s);

- adjustable PWM frequency from 50 to 300 Hz;

- input for speed reduction or deadman feature or "fault" output (default);

- frictioned lever version available;

- output curve shape: linear or parabolic (selectable);

- DV digital output is activate when PWM output is on;

- all working parameters are adjustable through a serial port and the

- Windows® SepSim program using a special serial port adapter (AISR)

Technical features:

• Simple knob version
• 
• Finger joystick version
• 

MAS2 main characteristics:

- single output voltage signal.

• available ranges are: 0÷5V, 0÷10V, 5÷0÷5V, 0.5÷2.5÷4.5V or any other range within 0÷10V;
• ratiometric (25%÷50%÷75% of supply voltage).

- output curve shape: linear or parabolic (selectable);

- ramps on signal adjustable from 0 to 25 s (step 0.1 s);

- input usable for:

• speed reduction (calibration adjustable for each side);
• block one or both sides of signal output;
• deadman feature (to be activated before moving the lever);

- lever with friction version available (retained lever);

- high current digital directional outputs, usable as FAULT signal;

- all working parameters are programmable through a serial port and the

- Windows® SepSim program using a special serial port adapter (AISR)

Technical features:

• Simple knob version
• 
• Finger joystick version:
• 

MAC2 main characteristics:

- programmable transmission parameters: CANbus speed, device nodeID, data timing;

- synchronous or asynchronous transmission (selectable);

- output curve shape: linear or parabolic (selectable);

- frictioned lever version available.

Technical features:

• Simple knob version
• 
• Finger joystick version
• 

Faber-Com创建于1989年意大利，经过多年发展，公司在移动设备领域，从汽车起重机到空中平台、钻孔机、混凝土泵、船用起重机、林机、钩和箕都装载机、农业机械等领域都有广泛的涉及。主要产品包括：平面传感器、有无线遥控器、操纵杆、比例调节阀螺线管、倾斜传感器负荷限制器、控制器等，这些产品在车载起重机臂起重机刚性、钻井机器、起重机、混凝土泵等领域都有广泛应用。

Faber-Com创建于1989年意大利，经过多年发展，公司在移动设备领域，从汽车起重机到空中平台、钻孔机、混凝土泵、船用起重机、林机、钩和箕都装载机、农业机械等领域都有广泛的涉及。主要产品包括：平面传感器、有无线遥控器、操纵杆、比例调节阀螺线管、倾斜传感器负荷限制器、控制器等，这些产品在车载起重机臂起重机刚性、钻井机器、起重机、混凝土泵等领域都有广泛应用。