Search
Post Requirements
Post Requirements
Product information
Soft starters for Slip Ring Motors (SYQ series)
SYQ series Liquid Soft Starter of Slip Ring Motor
Three phase AC 0.38kv~10kv slip ring motor liquid soft starter
Application scope：
It is used for the smooth soft start of slip ring motor, rated voltage of 0.4kV、0.66kV、3kV、6kV、10kV.
Standards adopted：
Low voltage whole set switches and controllers GB7251.1-2005
Automatic liquid resistor starting, speed regulation and compensating controller Q/XZS1-2009
Working principles：
A special liquid resistor is connected in series to the rotor circuit of slip ring motor; the liquid resistor get to work when the motor starts and its resistance gradually decrease during the preset time, so as the motor can start smoothly and accelerate eventually at minimal rated current and maximum torque. After start process is completed, the rotor circuit is shorted by the contactor. Its low starting current results in no impact on motors, load and power system as well as in no harmonic to affect the power system.
Operating Environment:
a. The ambient temperature upper limit and lower limit are respectively +40°C and -10°C;
b. Altitude is not more than 2000m(if it exceeds 2000m, we will choose plateau style);
c. Relative humidity: daily average value should not be more than 85%, while monthly average value should not be more than 90% ;
d. Ground gradient should be not more than 5°;
e. Places without fire, explosion risk, serious pollution, chemical corrosion and violent vibration.
![[Second-hand] laser](https://cdn.sumecdtx.com/equipment/20230818/928f9346aceb42e3b60670c380399f59.jpg)
