Search
Post Requirements
Post Requirements
Product information
The LA102 series quick connectors are used to make quick, hermetic connections to straight tubes, drilled holes, etc. The LA102 quick connectors are attached to the inner wall of the test piece by a sealing ring at the front end, and must therefore be used at pressures below 1 bar.
The sealing surfaces of the connector and the test piece must be dry during use and can only be used at pressures of up to 1 bar if water or other lubricants are present on the sealing surfaces.
Advantages of the product:
1. Adaptation of the seal by manual adjustment;
2. Compared with the LA100 connector, this connector is lighter and more flexible, and the handle operation is less likely to interfere, so it can be used in the use of small space.
Applications:
To realise a quick sealing test for pressure and vacuum on straight pipes, drilled components.
Technical parameters:
Working Pressure] 3 bar (Max)
Dewatering rate] 10-4 mbar-l/s (10-5 Pa-m3/s)
Working Temperature】+5℃ ～ +80℃
Sealing medium]: Oil-free, dry air or other non-corrosive gases.
Driving mode] Handle drive
Body material]: Stainless steel body.
Seal material] Nitrile rubber (NBR), other materials can be selected according to demand
Test procedure] Insert the LA102 quick connector into the test piece; rotate the handle of the quick connector by 90° to achieve connection sealing, and then apply the test pressure; at the end of the test, rotate the quick connector back to 90° and remove it.
