SUMEC TOUCH WORLD

LD 3000 AX

Innovative vertical measurement technology
AFFRI®LD 3000 AX is a pure motor driven hardness tester with automatic preloading
Load, load and measure. AFFRI® system hardness tester can be tested in Rockwell hardness test
Ultra-high indentation depth accuracy and measurement resolution. Because AFFRI® test system
Generally, under any conditions, it can not be interfered with by any external factors to ensure hardness indentation
The measurement of...
One-click measurement
Just press the start button, and the test head section will begin to drop and automatically advance
Line a complete hardness test cycle:
1. Automatic access to the sample surface
2. Automatic clamping and activation of reference surface points
3. Automatic preloading and loading force
4. Automatic measurement
5. Automatic return trip within the programmable distance
When the entire test cycle is complete, the results are immediately displayed on the large screen.
The autofocus function is adjusted on the actual image
The brightness of the scan, at any magnification can be
Achieve optical precision positioning. This system guarantees reading
Number accuracy, while also reducing reading time.
! The entire test is fully motor driven and automated, so the test results are not affected by the operator, and operators of all skill levels can easily use it.

LD 3000 AX

Force range
9.807 19.60 24.52 29.42 49.03 61.29 98.07 147.1 153.2 196 245.2 294.2 306.5 441.3 490.35 588.4 612.9 980.7 1226 1471 1839 2452 4903 7335 9807 14709 29421 N
1 2 2.5 3 5 6.25 10 15 15.6 20 25 30 31.2 45 50 60 62.5 100 125 150 187.5 250 500 750 1000 1500 3000 kgf
HRA HRB HRC HRD HRE HRF HRG HRH HRK HRL HRM HRP HRR HRS HRV HR15 HR30 HR45 N/T/S/W/X/Y HV1 HV2 HV3 HV5 HV10 HV15 HV20 HV30 HV60 HV100
1/1 1/2.5 1/5 1/10 1/30 2.5/6.25 2.5/15.625 2.5/31.25 2.5/62.5 2.5/187.5 5/25 5/62.5 5/125 5/250 5/750 10/100 10/250 10/500 10/1000 10/1500 10/3000
Automatic measurement and automatic reading
Rockwell, Surface Rockwell, Brinell, Vickers, Knoop and Shaw.
Comply with international standards: ASTM E18-E10-E103-E384-D2240 / ISO 6506-6507-6508-4545 -
2039 etc.
range
Shaw A/D (optional) Plastics and rubber EN-ISO 2039:49-132-358-961 N Temperature: Measuring range -40.0 to + 80.0 °C
Rockwell Test - DIN EN ISO 6508 / ASTM E-18 Vickers Test - DIN EN ISO 6507 / ASTM E-384 (Produces Indentation)
Brinell HBW/HBWT test - DIN EN ISO 6506 / ASTM E-10
This hardness tester automatically measures every hardness scale. Through the instrument
Buttons on the side or ICONS on the software system and touch screens can control the whole thing
The measurement process.
In any case, automatic preloading and loading as well as autofocus and autoread
The results of books are the same.
This means that the hardness value results are not due to the operator's line of sight or measurement
The test method and the impression of calculation deviation are completely free from human interference.
When you have questions about the automatic test results, you can also manually use the lever
Recheck by focusing and manual reading (see left-hand image).

Motor driven indenter travel
The hardness tester is also equipped with an additional motor, which can control the vertical stroke of the indenter by 20 mm/h
0.8 ". This is a separate additional stroke, which works with the total stroke of the measuring head part
It's separate. When measuring an uneven sample or a skewed part, the measuring head will follow
Ensure constant contact with the specimen. This is designed for the worst degree of reduction due to the specimen surface
There are oil or rough factors caused by the error. In this way, the sample preparation time can be greatly reduced
Improve test accuracy and speed.
The test cycle is automatically activated when the indenter is in contact with the specimen surface
Automatically activated, the sample can be automatically operated at any position within the 20mm/8" vertical stroke range
Identify.
Automatic rotation tower
The automatic rotating tower can be mounted with an indenter and an objective lens (the objective lens can be based on the test mark
Quasi-replacement ratio). Automatic rotation, automatic switching of indenter/objective, automatic positioning center
Such functions are perfect for single or multiple indentation measurements. Every tool can be wrong
It is often easily replaced by hand tightening.
From the curved test surface to the flat surface, the hardness tester is
Can be automatically fast in any test area
Close to the surface of the sample table. For tube wall inside
Side or tilted test surfaces, we can
To provide special accessories to achieve measurement.

LD 3000 AX
!
FORCE (N)
Optimal
Force
TIME (sec)
AFFRI System
Original Closed Loop
(Pat Affri)
OTHER Systems
Traditional Dead Weight
Load and closed loop control technology of force value sensor
Compared to conventional weight loading methods, AFFRI sensor closed-loop control technology ensures that the force sensor and the indenter are coaxial, and the load is directly applied to the indenter main axis
On, there is no deviation, friction, overload. At the same time, there is no need for leveling, fast speed, no need for oil pressure valves, no need for frequent maintenance. Compared to traditional weight loaders
AFFRI sensor closed loop control technology ensures that the force sensor and indenter coaxial line, the load directly acting on the indenter spindle line, no deviation, friction
Shit, overload. At the same time, there is no need for leveling, fast speed, no need for oil pressure valves, no need for frequent maintenance. Even though the entire hardness tester is in a slanted position, the AFFRI system
The system can also complete the test accurately.
The accurate measurement system ensures that the first test results are correct and no second test is required. R&R(repeatability and
The technology is at the leading level in the world.
The first test was absolutely correct. This can save users time and money, while also improving productivity and production efficiency.
Clamping System (AFFRI Patent)
The clamping system is designed to ensure that the indenter is always in close contact with the specimen during the test. The clamping system ensures the stability of any specimen throughout the test cycle, with the measuring head following the specimen in a vertical stroke
Produces a constant clamping force and does not require additional tooling. This function enables stable testing on large and medium samples.

Automatic Brinell and Vickers readings
AFFRI® LD 3000 AX is capable of performing Vickers, Brinell and Knower measurements according to ASTM and ISO standards. On camera
The head and optical system can automatically read the indentation. Through focus, image sharpness, contrast adjustment and brightness in the software
Adjustment and other functions, regardless of the number of tests, can ensure the accuracy and repeatability of test results.
Automatic measurement of sample surfaces: From fully polished to rough or etched samples, the software can automatically measure any sample
The surface.

AUTOFOCUS
Motor driven autofocus
AUTO-LIgHTINg
Automatic brightness control
The software can control the entire measurement to avoid setting errors or human influence. The repeatability function of automatic measurement avoids artificial
External factors interfere.
mANUAL mEASURE
Manual measurement of indentation
Automatic real-time brightness and contrast adjustment. Without any human intervention, the brightness function can
Optimize the visibility of any dark or bright specimen surface. When reading indentation manually and automatically
The edges or sharp angles of the indentation can be clearly seen.

LD 3000 AX
Touch display and measurement software
The large touch screen is convenient for test control and clear reading. Built-in Windows® operating system. Select the hardness scale, objective lens and set the hardness test parameters. Select
Any other hardness conversion scale (can display the hardness values of two hardness scales at the same time). The amount of compensation and the correction of the circle can be used when testing cylindrical surfaces of different calibers. in
Before the test starts, you can check whether the current test method and the selected test tool are correct through the prompts on the screen. Generate test reports and test data charts with one click. every
Both test results and data can be stored in a software database.
Selection of hardness scales and test parameters Clearly visible indentation and test area list of test results (includes tolerances for three types of charts including standard deviations
Circumference LOW-OK-HIGH and statistics)
Test result management, report templates and printing
Customizable test report: customer's public
Division LOGO, sample information, statistics and
A diagram. Export the file in CSV format.
Test data import and export
Sample information can be entered with a scanning gun. Test methods or sample drawings can be scanned directly by bar code. The hardness tester can be completely
Get all the information automatically. After the test, the data result can be added to the barcode and immediately returned to the order management system
One. Both file import and export are freely configurable, so they can be selected separately. Data can be obtained via USB result and LAN interface
Export. You can connect to network databases, computers and printers.
LD 3000 AX
HBWT 2.5/62.5 HBWT 2.5/187.5 HBWT 5/62.5 HBWT 5/125 HBWT 5/250
HBWT 5/750 HBWT 10/100 HBWT 10/250 HBWT 10/500 HBWT 10/1000
HBWT 10/1500 HBWT 10/3000
HRA HRB HRC HRD HRE HRF HRG HRH
HRK HRL HRM HRP HRR HRS HRV
HR15 N/T/S/W/X/Y HR30 N/T/S/W/X/Y HR45 N/T/S/W/X/Y
The test cycle is very fast! A complete measurement process takes only 15 seconds, including
The 10 seconds loading time required by ASTM international standard is provided. If HBWT hardness scale is used
Ruler and Rockwell hardness scale, can test 200 samples per hour.
Fully automatic Rockwell and Brinell HBWT
Because the AFFRI® system guarantees the accuracy of the indentation measurement in the face of any outside interference. These years
Come, R&R(Repeatability and reproducibility) performance is guaranteed! !
ISO 6506 - ASTM E10 (Brinell HBWT tests):
ISO 6508 - ASTM E18 (Rockwell HR tests):
ISO 6508 - ASTM E18 (Superficial Rockwell HR tests):
Head protection device
The indenter of AFFRI hardness tester is protected and retractable only when the sample is finished
After all are clamped and stabilized, the indenter will move downward, which can prevent
Accidental damage. AFFRI's unique diamond indenter has an exceptionally long service life
Life, more than other products on the market head.
Brinell HBWT test Rockwell HRC Test List of test results, statistics and charts Standard Deviation chart
Indentation depth is read directly
The LD3000AX is an all-motor driven hardness
Meter, automatically preload, load and measure. AFFRI®
The system hardness tester is available on Rockwell and HBWT hardness scales
Achieve the highest level of depth accuracy and measurement in the test
The resolution.
Type LD3000AX hardness tester can be in your production
Perform all hardness scales on site or in the laboratory
The measurement of...
SPECIAL FOR HEAT THREATMENT
AUTOMATIC CHD WITH NON-DESTRUCTIVE METHOD
The hardness tester LD 3000 AF (specific model) determine the case
hardness depth (CHD). Testing can be performed on a non-metallographic
prepared specimen. The system will determine the superficial hardness and
its effective depth (CHD), from 0.12 to 1.8 mm, without having to destroy
and test the specimen. Hence all the manufactured pieces can be tested.
Great precision and minimal operator intervention on finished products:
there’s no need for sample preparation, no need to separate material types
or to polish the cross section as for the Vickers method. In just one minute
the tester generates the report with the CHD graph.
Ask for more info!
LD 3000 AX
Need more testing space?
Increase test height
The LD 3000 AX hardness tester is equipped with a screw lift stage, which can
Support sample, upward distance from the indenter travel is 200mm / 240mm. The load
The platform can be easily removed and replaced using an Allen wrench. Bigger if needed
The test height can be replaced with a large metal plate as a stage.
Standard size test bench size

Real-time support
Real-time support. Connect your hardness tester to the Internet so that we can diagnose any technical issues remotely, provide additional operator training and software updates. Lose,
For more information, visit www.affri.com.
attachment
AFFRI offers a wide range of accessories to meet different test needs. Special solutions can be customized according to the needs of users to test rough samples.
A range of different tooling can be used to test specimens of different sizes, especially for extremely small or oddly shaped specimens.
AFFRI offers high quality hardness indenters with international certification. Spherical indenter, conical indenter or diamond indenter, can be Rockwell, Brinell, Vickers, Knoop and Shore hardness of each mark
Ruler provides test guarantee. At the same time, it can also provide a special length of indenter, giving the perfect solution for special samples.
AFFRI's hardness blocks cover all hardness scales and values, and each block is regularly certified by UKAS/ACCREDIA.
All AFFRI accessories can be customized according to the size and geometry of the user's sample, ensuring the accuracy and stability of the test results.
extras
A010.0.021 - Bench table for hardness tester
A022.0.002 - AUTO START command trough pedal for series tests
E008.010 - L.I.S.A. Laser indicator patented Affri System
A049.1.001 - Adjustable vice from 0 to 50 mm
A009.0.001 - Manual table 100x100 mm with 10 μm step
Hardness indenter
700.1.5.013 - Ball indenter W ø2,5 mm
700.1.5.014 - Ball indenter W ø5 mm
700.1.5.015 - Ball indenter W ø10 mm
700.1.5.016 - Rockwell diamond indenter 120°
700.1.5.017 - Vickers diamond indenter 136°
700.1.5.018 - Ball indenter W Ø1/16 ”
Standard hardness block
601.0.0.001 - HRA
601.0.0.002 - HRB
601.0.0.003 - HRC
600.0.0.003 - HBW 2.5/62.5
601.0.0.005 - HBW 2.5/187.5
600.0.0.001 - HBW 5/125
600.0.0.010 - HBW 5/250
600.0.0.013 - HBW 5/750
600.0.0.008 - HBW 10/250
600.0.0.007 - HBW 10/500
600.0.0.006 - HBW 10/1000
600.0.0.005 - HBW 10/1500
600.0.0.015 - HBW 10/3000
602.0.0.001 - HV30
workwear
A014.0.001 - Flat anvil ø60 mm
A014.0.002 - Flat anvil ø150 mm
A014.0.003 - V face anvil ø60 mm for Ø 8 to 220 mm
A014.0.004 - Anvil Ø25 mm flat + V for Ø 5 to 30 mm
A014.0.005 - Ball Anvil reclining self aligning
A014.0.006 - Diamond spot anvil for thin plates
A014.0.011 - Spherical anvil Radius 10 mm
A014.0.012 - Spherical anvil Radius 15 mm
A014.0.013 - Spherical anvil Radius 40 mm


LD 3000 AX
The information and technical data present in this catalogue are subject to changes. AFFRI® has the right
to modify the current data, at any time, in function of the evolution of raw material and new technology.
MODELS
LD3000AX: from 1 to 250 kgf (HR - HRS - HB - HV - HK) / from 1 to 250 kgf (HB - HV - HK) / from 3 to 3000 kgf (HR - HRS - HB - HV - HK) / from 3 to 3000 kgf (HB - HV - HK)
FORCE RANGE (Depending on the models)
Preload: 29.4 - 98.1 N (3 - 10 kgf)
Rockwell / Superficial R.: 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf) / 147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)
Brinell:
9.807 - 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 - 2452 - 4903 - 7355 - 9870 - 29421 N
(1 - 2.5 - 5 - 6.25 - 10 - 15.625 - 25 - 30 - 31.2 - 62.5 - 125 - 187.5 - 250 - 500 - 750 - 1000 - 3000 kgf)
Vickers/Knoop: 9.807 - 19.60 - 29.42 - 49.03 - 98.07 - 196.14 - 294.2 - 490.3 - 980.7 N (1 - 2 - 3 - 5 - 10 - 20 - 30 - 50 - 100 kgf)
Optional tests: 49 - 132 - 358 - 961 N (for plastic and rubber as per EN-ISO 2039)
FEASIBLE TESTS (Depending on the models)
Rockwell / Superficial R.: HRA - HRB - HRC - HRD - HRE - HRF - HRG - HRH - HRK - HRL - HRM - HRP - HRR - HRS - HRV - HR15N/T/S/W/X/Y - HR30N/T/S/W/X/Y - HR45N/T/S/W/X/Y
Brinell HBW: 1/1 - 1/2.5 - 1/5 - 1/10 - 1/30 - 2.5/6.25 - 2.5/15.625 - 2.5/31.25 - 2.5/62.5 - 2.5/187.5 - 5/25 - 5/31.25 - 5/62.5 - 5/125 - 5/250 - 5/750 - 10/100 - 10/125 -
10/250 - 10/500 - 10/1000 - 10/1500 - 10/3000
Brinell HBWT:
1/30 - 2.5/15.6 - 2.5/31.5 - 5/125(3) (Aluminum and alloys) - 2.5/62.5(2) (Aluminum and alloys) - 2.5/187.5(6) (Aluminum and alloys) - 2.5/187.5(5) (Carbon steel) -
2.5/187.5(1) (Cast iron) - 5/125 - 5/250 - 5/750 - 10/500 - 10/1000 - 10/1500 - 10/3000
Vickers: HV 1 - HV 2 - HV 3 - HV 5 - HV 10 - HV 20 - HV 30 - HV 50 - HV 100
Shore (As Option): ISO 2039, Shore A and D hardness scales for plastic
CHD (As Option): Automatic Case Hardness Depth tests with automatic graph
TECHNICAL DATA
Conformity Standards: EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2 / EN-ISO 2039 / ISO 868 / ASTM-E10 / ASTM-E18 / ASTM-E103 / ASTM 2240 / ASTM-E384 / JIS
Accuracy: Better than 0.5 %
Readout Division: 0.1 HBW / HBWT / HV - 0.01 HR
Lighting and Objectives LED - Objectives for HB - HV - HK measurements
Focus and Reading Automatic and Manual
Dwell Time From 1 to 99 seconds
Indenter Stroke: Motorized 20 mm / 0.8”
Height Capacity: 200 - 240 mm / 7.8 - 9.4” (More on request)
Depth Capacity: 190 mm / 7.4”
Tolerable Weight: 2000 kg
Temperature Range: From 10 °C to 35 °C
Data Output: USB - Ethernet (RS 232C, wireless upon request)
Power Supply: 110 or 220 V / 50÷60 Hz
Software: Affri - OMAG
Principle of Operation: Load Cell and Closed Loop (Affri patent)
Fields Of Use For all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Hard and soft plastics.
Packing: 600 kg - 110 x 108 x 174 cm / 44 x 43 x 70”
 

AFFRI Italy was founded in 1954 by the father of CEO AFFRI ROBERTO. AFFRI has a strong team, specializing in the development, production, sales and after-sales service of hardness tester for more than 70 years. AFFRI also manufactured hardness testers under the WILSON brand name for nearly 10 years. Over the past seven decades, AFFRI has patented numerous technologies, most notably sensors and closed-loop control. The world's first portable hardness tester was manufactured by AFFRI. AFFRI also produces custom models for many large domestic and international enterprises.

1954 - DUROMATIC 124

1954 – AFFRI公司生产了世界上第一台便携式洛氏硬度计

(具有专利权)

1964 - BZ

AFFRI公司生产了世界上第一台具有自动调零和预加载功能的便携式洛氏硬度计

(具有专利权)

1966 - RS

AFFRI公司生产了世界上第一台自动台式硬度计

(具有专利权)

1982 - DIGITRONIC

AFFRI公司生产了世界上第一台数显式自动台式硬度计

(具有专利权)

1984 - CK3000

AFFRI公司生产了带加载控制单元的闭环加载系统

(具有专利权)

1985 - ODK3000

AFFRI公司生产了全球第一台带闭环加载系统、带物镜测量压痕的自动布氏硬度机

(具有专利权)

1995 -  INTEGRAL

 AFFRI公司生产了全球第一台带闭环加载系统、带摄像头压痕测量的全自动布氏硬度机

(具有专利权)

1999 -  MRS

 AFFRI公司生产了带闭环加载系统的超快硬度测试装置.  

(具有专利权)

2000 -  MASTER

AFFRI公司生产了标准机（AFFRI 专利的闭环加载系统），具有更高的准确性.

(具有专利权)

2012 -  WIKI 30

AFFRI公司生产了全球第一台带闭环加载系统、带全自动对焦及压痕测量的便携式维氏硬度计

(具有专利权)

2013 -  RSDMAG

AFFRI公司生产了全球第一台便携式洛氏-布氏硬度计（带磁性吸附装置)

(具有专利权)

2013 -  ISRHU09

AFFRI公司生产了带闭环加载系统的的万能硬度计

(具有专利权)

意大利AFFRI公司成立于1954年，由公司CEO AFFRI ROBERTO先生的父亲创立。AFFRI公司拥有强大的团队，专业从事硬度计的研发、生产、销售以及售后服务等超过70年。早年AFFRI公司还为WILSON贴牌生产硬度计近10年。在七十年里，AFFRI公司取得了无数专利技术，其中最具代表性的就是传感器和闭环控制技术。世界上第一台便携式硬度计就是由AFFRI公司生产的。AFFRI公司还为多家国内外大型企业生产定制机型。中国区案例：沈阳华晨宝马汽车，世界上第一台全自动四工位压头国际橡胶硬度计来自AFFRI公司、宝武集团宝钢股份中央研究院引进了AFFRI公司高温多功能全自动洛氏硬度计。

AFFRI was founded in 1954, and since then, the company has focused on the development and production of high-tech, high-precision precision measuring instruments. Over the past 70 years, AFFRI has been striving to make breakthroughs, obtained numerous patents, developed a series of leading technology and outstanding functions of hardness tester, is a world-renowned professional manufacturer of hardness tester, its equipment is widely used in aerospace, automotive manufacturing, steel, biomedical, railway track, mechanical parts, plastic and rubber, military and other fields, customers all over the world.