SUMEC TOUCH WORLD

The PM135 is a powerful multi-functional power parameter measuring instrument. It provides high-precision power parameter measurement as well as power quality and harmonic analysis. It has Chinese display on LCD and can powerfully display waveform diagrams, harmonic spectrum diagrams and vector diagrams. Basic functions:

Multifunctional three-phase power parameter measurement: 

■ Voltage, current (including neutral current), power, electrical energy (E and EH types), power factor, frequency, unbalanced voltage/current, maximum/minimum value, demand... 

■ Current range up to 200%. 

■ Supports frequencies: 25, 50, 60 and 400Hz. 

■ Direct connection to 690V L-L (1.15 MV through PT). 

■ 20ms data refresh. 

■ Automatic recording of load curves. 

■ Supports DC measurement by using Hall effect sensors.
 

Basic power quality (E or EH type): 

■ Harmonics of individual voltages and currents (up to 40 times) (EH type). 

■ THD, TDD and k-factor of voltage and current (EH type). 

■ Maximum/minimum values with timestamps. 

■ Waveform capture with 128 samples/cycle sampling rate. 

■ Chinese menu, waveform display, harmonic spectrum display, vector diagram display. 

■ Intuitive load rate bar indication/warning independent of the screen.
 

Metering meter (E and EH types): 

■ Accuracy exceeds Class 0.5s, and the high-precision EH type can reach Class 0.2s accuracy. 

■ 8-rate time-of-use tariff (TOU). 

■ Calibration certificates with ISO17025 and ILAC accreditation can be provided. Event/data recording (E and EH models): 

■ System event and data recording. 

■ Real-time timestamp.

Communication protocol: 

■ Standard RS485, optional second communication port (Ethernet, RS232/422/485, Profibus, CAN, GPRS, radio frequency). 

■ Protocols optional: Modbus RTU, ASCII, DNP 3.0, Modbus/TCP, DNP3/TCP, Profibus DP, IEC 60870-5-101, IEC 60870-5-104. 

■ Baud rates optional: up to 115.2kbps (MODBUS).
 

Alarm and control functions: 

■ 16 programmable set points. 

■ 4 counters.

Real-time clock: 

■ Built-in real-time clock and calendar function. 

■ Backup battery for RTC real-time clock.
 

Power supply: 

■ Standard AC/DC power supply (85 - 265V AC, 88 - 290V DC). 

■ Special power supplies optional (12, 24 & 48V DC).

Installation and dimensions: 

■ Panel mounting: 92mm×92mm square opening or 4〞 circular opening. 

■ Weight: 0.7kg / 1.5lbs. 

■ Height×Width×Thickness: 114x114x109mm / 4.5x4.5x4.3〞. 

■ One expansion module can be installed.

SATEC was founded in 1987 by Herman Branover, a renowned physicist and member of the Soviet Academy of Sciences, and several university professors in Israel, a country of innovation. Currently, the headquarters and factories are located in Jerusalem, Israel (International) and New Jersey, USA(North America).

SATEC has a good reputation and customer base with its rich product lines, high quality and excellent price/performance ratio, and is a pioneer and major brand in its business field. Products are sold in more than 70 countries on 6 continents

The company's performance covers all major industries around the world, such as office buildings, universities, supermarkets, shopping malls, banks, data centers, electronics, hospitals, petrochemicals, automobile/aircraft manufacturing, daily chemicals, food and beverage, pharmaceuticals, power grid companies, water treatment,Power plants, railways airports, subways...

SATEC focuses on
●Power Monitoring and Energy Management (multi-functional power meters, ower SCADA system, energy management system and grid revenue meters)

●Power Quality Monitoring and Correction (power quality analyzers, power quality analysis software, power factor correction, active power filter, voltage sag compensation)

●Power Protection Products(arc protection and wireless temperature monitoring, protection relay, low voltage motor protector, ground insulation monitoring in unearthed (IT) system, PMU phasor measurement unit, DFR digital fault recorder)

●Intelligent Building Monitoring and Control System (intelligent lighting control system, energy management, air conditioning monitoring and control, elevator monitoring, indoor environment monitoring...)

Exclusive Dealership

AMDAR from Israel
●Founded in Netanya, Israel in 1974
●Focus on insulation monitoring, ATS, smart home, electronic relays...
●SATEC is AMDAR's global partner for ground insulation monitoring products in unearthed (IT) system

RUHSTRAT from Germany
●Founded in 1888 by the Ruhstrat brothers in Gottingen, Germany
●With more than 80 years of experience in voltage stabilization technology, RUHSTRAT offers cutting-edge solutions for voltage sag compensation and voltage stabilization
●SATEC is RUHSTRAT's partner for voltage sag compensation solution

Steco Source Electric Technology (Beijing) Co., LTD. (STECO China) was established in 2013, is a wholly-owned subsidiary of STeco Electric, committed to STeco brand development in greater China, business development, and to provide users in greater China with faster professional support and service.

Stech Source Electric Technology (Beijing) Co., LTD. (STECH China) is the sole partner of RUHSTRAT Electric Dynamic Voltage Regulation System and Dynamic Voltage Restorer (AVC) in China.

Steco Electric is the global partner of AMDAR Electronic Medical Isolation Power System and IT grounding system insulation monitoring system in Israel. Stech China is the partner of Israel's AMDAR products in Greater China.

SATEC's range of equipment products is suitable for energy consumers in all sectors of public energy enterprises. We have a wide range of application-based products, It includes functional power parameter measuring instrument, intelligent distribution diagnostic device, power quality online monitoring device, gateway meter, power monitoring system, energy management system, reactive power compensation, active filter, dynamic voltage dip protection, comprehensive protection, arc protection, motor protection, medical isolation power system, harmonic protector, intelligent lighting and other equipment and systems. All SATEC devices comply with widely adopted standards worldwide and are supported by our power management software.

企业名称：司泰科源电气科技（北京）有限公司

企业类型：有限责任公司（外国法人独资）

注册资本：人民币500万元

成立时间：2013-7-19

经营范围：技术服务、技术开发、技术咨询、技术交流技术转让、技术推广;软件开发;信息技术咨询服务，节能管理服务，电力行业高效节能技术研发;电线、电缆经产品销售议电力电子无整件销售，坐重元器件推爱，电子广元器件与机电组件设备销售，电子专用材料销售，电子用设备销售，货物进出口，技术进出口，进出口代理，业自动控制系统装置销售;充电桩销售;电容器及其配套设备销售，半导体器件专用设备销售，半导体分立器件销售;集成电路芯片及产品销售，光电子器件销售:光学玻璃销售，光学仪器销售;通讯设备销售，电工仅器仪表销售:仪器仪表销售，实验分析仪器销售;配电开关控制设备销售，电子测量仪器销售:数据处理服务，信息系统集成服务。(除依法须经批准的项目外，凭营业执照依法自主开展经营活动)(不得从事国家和本市产业政策禁止和限制类项目的经营活动。)