SUMEC TOUCH WORLD

SPR66 arc light protection system.

The SPR66 adopts a PC-type modular structure. On the basis of ensuring the standard configuration of arc light protection, it provides a variety of options such as I/O boards, communication boards, and arc light boards. It can continuously inspect all equipment in the system to ensure that the I/O unit and point sensor hardware in the system are normal and connected to the system normally. The arc light sensor uses a specially made photosensitive resistor, which is not sensitive to daily light and can effectively avoid interference from other lights except arc light. Arc light protection is a new type of protection device that quickly cuts off the power supply at the fault point by detecting fault arc light to avoid serious damage to the electrical equipment itself. It is a reasonable supplement to traditional microcomputer protection and can effectively protect fault conditions and dead zones that traditional microcomputer protection cannot protect.

Features of SPR66: 

Main unit SPR 60ARC: 

1) New protection concept: When electrical equipment fails, there is an arc light phenomenon. Arc light is the energy source that causes serious damage to electrical equipment. Making the duration of arc light as short as possible will essentially avoid damage to electrical equipment. 

2) Uninterrupted system self-inspection: The SPR 66 main unit can continuously inspect all equipment in the system to ensure that the I/O unit and point sensor hardware in the system are normal and connected to the system normally. 

3) Modular structure: The main unit adopts a PC-type modular structure. On the basis of ensuring the standard configuration of arc light protection, it provides a variety of options such as I/O boards, communication boards, and arc light boards. 

4) Cost-effective system solution: The main unit and expansion unit can form a comprehensive arc light protection system, or they can be used alone to configure an economical arc light protection system. 

5) Flexible expansion and upgrade: The distributed structure of the arc light protection system can add main unit boards, I/O units, and sensors at any time, and flexibly set system protection logic to meet the actual needs of the site. 

6) System structure design: In a multi-bus arc light protection system with more than two sections of buses, multiple main units are in an equal position in the overall system communication. And the main units are mutually redundant, meeting the redundancy requirements of protection and enhancing the reliability of the system. 

7) High-speed fault response: The arc light protection system optimizes the response speed on the basis of safety and reliability. It only takes 5-7ms from detecting arc light to relay trip output, which is much faster than the trip output time of traditional relay protection. 

8) Flexible logic programming function: Using MARCS setting software, customize protection logic according to on-site needs, which can meet various complex operation modes.

Composition of arc light protection system: 

Main unit SPR 66: 

• Detection of two sets of three-phase current, zero-sequence current and zero-sequence voltage. 
• PC modular structure for easy expansion and maintenance. 
• Large LCD human-machine interface, system one-line diagram display, and support for Chinese menus. 
• Standard configuration of five large-capacity high-speed trip contacts, six digital inputs, with two arc light sensor connections by itself, and an alarm contact with normally open and normally closed switching. 
• Integrate event records, disturbance records, and fault waveform capture into the arc light protection system to improve the analysis ability of arc light phenomena and before, during, and after faults. 
• Optional trip logic "arc light" or "arc light + current" double-criteria to ensure the rapidity and reliability of tripping. 
• Two RJ-45 ports for connecting expansion units. 
• RS485 communication port, Ethernet port and front panel USB port, supporting multiple protocols such as IEC 61850, Modbus RTU/TCP, and IEC-103. 
• Continuous self-inspection of all units and breaker failure protection function.

I/O unit SA12E: 

• Four selective trip output contacts for specified sensors. 
• Three trip mode options. 
• Connection of 12-point sensors. 
• Sensor self-inspection. 
• Sensor channel and trip relay action indication. 
• Two RJ45 ports for interconnection between the main unit and the I/O unit. 
• Comes with an RS485 communication port and supports the MODBUS communication protocol. 
• Can work independently to realize the criterion trip mode selection of "arc light" or "arc light + current".

Arc light sensor AS01: 

• Action when light intensity > 8000 Lux. 
• Detection range of 270°. 
• Meet the vibration requirements of IP61. 
• Patented technology is not sensitive to daily light sources.

SATEC was founded in 1987 by Herman Branover, a renowned physicist and member of the Soviet Academy of Sciences, and several university professors in Israel, a country of innovation. Currently, the headquarters and factories are located in Jerusalem, Israel (International) and New Jersey, USA(North America).

SATEC has a good reputation and customer base with its rich product lines, high quality and excellent price/performance ratio, and is a pioneer and major brand in its business field. Products are sold in more than 70 countries on 6 continents

The company's performance covers all major industries around the world, such as office buildings, universities, supermarkets, shopping malls, banks, data centers, electronics, hospitals, petrochemicals, automobile/aircraft manufacturing, daily chemicals, food and beverage, pharmaceuticals, power grid companies, water treatment,Power plants, railways airports, subways...

SATEC focuses on
●Power Monitoring and Energy Management (multi-functional power meters, ower SCADA system, energy management system and grid revenue meters)

●Power Quality Monitoring and Correction (power quality analyzers, power quality analysis software, power factor correction, active power filter, voltage sag compensation)

●Power Protection Products(arc protection and wireless temperature monitoring, protection relay, low voltage motor protector, ground insulation monitoring in unearthed (IT) system, PMU phasor measurement unit, DFR digital fault recorder)

●Intelligent Building Monitoring and Control System (intelligent lighting control system, energy management, air conditioning monitoring and control, elevator monitoring, indoor environment monitoring...)

Exclusive Dealership

AMDAR from Israel
●Founded in Netanya, Israel in 1974
●Focus on insulation monitoring, ATS, smart home, electronic relays...
●SATEC is AMDAR's global partner for ground insulation monitoring products in unearthed (IT) system

RUHSTRAT from Germany
●Founded in 1888 by the Ruhstrat brothers in Gottingen, Germany
●With more than 80 years of experience in voltage stabilization technology, RUHSTRAT offers cutting-edge solutions for voltage sag compensation and voltage stabilization
●SATEC is RUHSTRAT's partner for voltage sag compensation solution

Steco Source Electric Technology (Beijing) Co., LTD. (STECO China) was established in 2013, is a wholly-owned subsidiary of STeco Electric, committed to STeco brand development in greater China, business development, and to provide users in greater China with faster professional support and service.

Stech Source Electric Technology (Beijing) Co., LTD. (STECH China) is the sole partner of RUHSTRAT Electric Dynamic Voltage Regulation System and Dynamic Voltage Restorer (AVC) in China.

Steco Electric is the global partner of AMDAR Electronic Medical Isolation Power System and IT grounding system insulation monitoring system in Israel. Stech China is the partner of Israel's AMDAR products in Greater China.

SATEC's range of equipment products is suitable for energy consumers in all sectors of public energy enterprises. We have a wide range of application-based products, It includes functional power parameter measuring instrument, intelligent distribution diagnostic device, power quality online monitoring device, gateway meter, power monitoring system, energy management system, reactive power compensation, active filter, dynamic voltage dip protection, comprehensive protection, arc protection, motor protection, medical isolation power system, harmonic protector, intelligent lighting and other equipment and systems. All SATEC devices comply with widely adopted standards worldwide and are supported by our power management software.

企业名称：司泰科源电气科技（北京）有限公司

企业类型：有限责任公司（外国法人独资）

注册资本：人民币500万元

成立时间：2013-7-19

经营范围：技术服务、技术开发、技术咨询、技术交流技术转让、技术推广;软件开发;信息技术咨询服务，节能管理服务，电力行业高效节能技术研发;电线、电缆经产品销售议电力电子无整件销售，坐重元器件推爱，电子广元器件与机电组件设备销售，电子专用材料销售，电子用设备销售，货物进出口，技术进出口，进出口代理，业自动控制系统装置销售;充电桩销售;电容器及其配套设备销售，半导体器件专用设备销售，半导体分立器件销售;集成电路芯片及产品销售，光电子器件销售:光学玻璃销售，光学仪器销售;通讯设备销售，电工仅器仪表销售:仪器仪表销售，实验分析仪器销售;配电开关控制设备销售，电子测量仪器销售:数据处理服务，信息系统集成服务。(除依法须经批准的项目外，凭营业执照依法自主开展经营活动)(不得从事国家和本市产业政策禁止和限制类项目的经营活动。)