SUMEC TOUCH WORLD

Chlortetracycline tray vacuum dryer for feed

working principle

Wet materials are continuously added from the feeder to the first drying tray in the upper part of the dryer, and the rake arm with rake blades makes a rotary motion to make the rake blades continuously turn over the materials. The material flows along the surface of the drying pan along an exponential spiral. The material on the small drying pan is transferred to the outer edge and falls to the outer edge of the large drying pan below. On the large drying pan, the material moves inward and falls from the middle. The material inlet falls into the next small drying pan. Large and small drying trays are arranged alternately up and down so that the material can flow continuously through the entire dryer. Heating medium is introduced into the hollow drying plate. The heating medium takes the form of saturated steam, hot water, heat transfer oil and high-temperature molten salt. The heating medium enters from one end of the drying plate and is led out from the other end. The dried material falls from the last layer of drying pan to the collecting pan, and is finally transferred to the discharge port by the rake blades for discharge. Wet content overflows from the material and is discharged through the moisture discharge port arranged on the top cover. The wet content of the vacuum type tray dryer is extracted through the vacuum port arranged on the top cover. Dry material discharged from the bottom layer can be packaged directly. By adding auxiliary machines such as finned heaters, solvent recovery condensers, pre-dryers, and induced draft fans, its drying production capacity can be improved. By drying paste and heat-sensitive materials, solvents can be easily recovered, and heating can be carried out., cooling, calcination, sublimation, pyrolysis and reaction operations.

application field

Disc continuous dryers are suitable for a variety of materials, mainly including powder, granular and block materials. This drying equipment is widely used in chemical, medicine, pesticide, food, feed, agricultural and sideline product processing and other industries. It has the characteristics of high thermal efficiency, low energy consumption, small floor area, simple configuration, and convenient operation and control.

Chemical raw materials These materials need to maintain the shape and physical properties of the particles during the drying process. The tray dryer can effectively control the temperature and humidity to ensure the drying effect.

Pharmaceutical raw materials The tray dryer can adjust the drying temperature and wind speed according to the characteristics of different medicinal materials to meet the drying needs of different medicinal materials.

Food raw materials This drying equipment can ensure uniform and stable drying of food raw materials and ensure product quality and food safety.

Agricultural raw materials The tray dryer can adjust the drying time and temperature according to different raw material properties to ensure drying effect and product quality.

Sulphur concentrate

Ternary material precursors

application characteristics

1)Easy to control

The drying process can be achieved ideal by adjusting the thickness of the material layer, the speed of the spindle, the number of harrow arms, and the type and size of the harrow blades. Each layer of drying pan can be separately introduced with cold and hot media to cool or heat the material, accurately and easily control the material temperature. Accurately adjust the retention time of materials. The material flow direction is single, there is no back-mixing phenomenon, and it is dried evenly without mixing.

2)convenient operation

Driving and stopping the dryer is very simple. After the feeding is stopped, the raking blades that convey the material can quickly empty the material in the dryer. Through the special large-scale inspection door mirror, the inside of the equipment can be carefully cleaned and observed.

3)low energy consumption

The material layer is very thin, the spindle speed is low, and the material conveying system requires less power and consumes less power. Drying is carried out with conductive heat, with high thermal efficiency and low energy consumption.

4)Environmental Protection

Atmospheric pressure type: The air flow speed in the equipment is low, and the humidity in the equipment is low, making it difficult for dust to float to the top of the equipment, so the exhaust gas discharged from the top moisture outlet contains al* no dust.

Closed type: Equipped with a solvent recovery device, it can easily recover organic solvents in hygroscopic gas. The solvent recovery device is simple and has a high recovery rate. For flammable, explosive, toxic and easily oxidizable materials, protective gas can be used as a moisture-carrying gas for closed-loop circulation to make it safe to operate. Especially suitable for drying flammable, explosive and toxic materials.

Vacuum type: Disc dryer operated under vacuum, especially suitable for drying heat-sensitive materials.

5)convenient installation

The entire dryer is shipped out of the factory and transported as a whole. It only needs to be hoisted in place, and the installation and positioning are very easy. Due to the layer-type layout and vertical installation, even if the drying area is large, the floor area is also small.

Become stronger and bigger, continue to start a business, never stop

patent for invention：

Changzhou Baokang Drying Machinery Co., Ltd. is engaged in drying equipment and pharmaceutical machinery research, development and manufacturing of professional manufacturers, is the current domestic production of drying equipment more varieties, specifications more complete enterprises.

Our company absorbs advanced technology and experience at home and abroad, in strict accordance with the relevant requirements of design, development, production, installation and service in one, while strictly implementing the quality policy, to ensure product quality. In the development and research of drying equipment, continuous innovation and transformation, design and manufacture a series of advanced technology and energy-saving products. And according to the needs of the market developed dozens of drying, granulation, mixing, dust collection series, products are widely used in pharmaceutical, chemical, food, light industry and other industries of industrial raw materials or products drying dehumidification, well received by users. The company has a variety of test prototypes, welcome customers to bring material test and inspection.

Our company is located in the beautiful Jiangnan water town, industrial star city - Changzhou, located in the hinterland of Shanghai and Nanjing economic development belt, pleasant climate, convenient transportation. Warmly welcome new and old customers, friends from all walks of life at home and abroad to visit us and work together to create a better future!